Silver Electrically Conductive Ink / Paint 7737-W - 10 gm Jar

Description

Applied Technologies, Inc.
General Description
:
WATER-BASE, NO VOC Silver Conductor Paint. Highly conductive "water based" silver paint for making high performance electrodes on plastic, wood, and ceramic substrates. Primary applications for this material include the following:
Environmental formula – contains NO organic solvents! **
MADE IN THE USA
**
15 gm Jars also available on our E-Bay Page!
Applications:
1.Electrically Conductive Coating
2. Thermally Conductive Coating
3. Electronics R&D
4. Printed Circuit Board Repair
5. Electroforming
6. SEM Ground Coating and EMI Shielding
Typical Properties:
Silver Content:
37%
±
2
Conductivity:
0.05-0.07 ohms/sq/mil  (<0.002 ohm-cm)
Viscosity:
3-4 Kcps (Brookfield RVT, Spin 7, 20 rpm, 25
°
C
Fineness of Grind:
<20 microns
Cure Schedule:
30 mins @ 25
°
C or 5-10 minutes @ 60-90
°
C
Thinner*:
DI Water
Shelf Life**:
Six months @ 25
°
C (Sealed Container)
*This material is optimized for brushing/dipping applications and thinning is not normally necessary. However, thinners may be added, with thorough blending, to replace solvent loss or to make slight adjustments for ease of application. In handling and using organic solvents, the safety precautions recommended in the MSDS should be observed.
**Even though this product is specially formulated to resist hard-packing, it should still be stirred, jar rolled, or shaken well prior to use.